Clean water pipes and fittings from Turkey

• pn 10 pipe (10 atū)

• pn 20 pipe (20atū)

• pn 25 stabil pipe (perforated)

• clamping sleeve

• reducing

• elbow 90º

• reduced elbow 90°

• elbow 45º

• t-part

• inegal t

• closing cap

• pipe bridge

• ball valve (for acid and water)

• ball valve (for hot water and cold water)

• joint (for acid and cold water)

• crosses

• mixing battery connecting plate

• round joint (with interior thread )

• hexagonal joint (with interior thread)

• round joint (with exterior thread)

• hexagonal joint (with exterior thread)

• socketed elbow (with interior thread)

• socketed elbow (with exterior thread)

• socketed t joint (with interior thread)

• socketed t joint (with exterior thread)

• separable joint (with interior thread)

• separable joint (with exterior thread)

• gate valve

• chromium alloy flush valve

• pipe clamp

• pair clamp

• pair clamp for stabile pipe

• threaded cap

• spirit level

• water level gauge

• mixing battery connecting plate

Unobjectionable by hygiene: All the installation pieces related to drinking water are subject to DIN 1988 T2 in the food subctance and food area.The hygiene feature of SPK pipes and fittings emanates from Polypropilene Co-polymer non-color , taste, and odor, containing no poisonous or canserogene additives threatening especially the human health.

Sound insulation: our pipes and fittings have a sound installation value peculiar to them.This feature provides a preventing impact of the flows and current noise to transmit to the nearby or next pipe pieces.Therefore, they are more practical compared to metal pipe installations.

Operating conditions:

In 20ºC cold water, 20 atü
In 95ºC hot water, 10 atü

Utilization areas:

As column pipes in multi-storey buildings ,
In every type of hot and cold water installations,
In central heating installations ,
In pneumatic installations,
In the industry.

Chemical resistance: PPRC is resistant to many solvents up to 60ºC.They create swelling effect from halogenized hydrocarbons and some oils and wax.The swelling is mild up to 30ºC.It has limited or very low resistance to such powerful oxidizing substances as nitrous acid,ozone,foamed sulphuric acid,hydrogen peroxide or halogen.In determining the resistance to chemical substances,the test saples are submerged into the test substances without mechanical stress , and then they are tested for swelling, weight loss and shrinking qualities.

Physiological qualities: PPRC is physiologically accepted in line with regulatory provisions related to consumption substances, and its additives are in conformity with the current VII.Recommendation of the Federal Health Department of Berlin by type, quantity and pureness,and therefore it has been accepted physiologically.

Resistance against UV rays: In installed state, pipes made from PPRC used in cold and hot water utilities are not exposed to UV rays.A stabilizer is added to the pipes in order for them tos tay in outdoors for six months.As in the SPK pipes, the transportation and storage is recommend in their original packing.

Shock effect: pipes made of Polipropilen Random Co-polimer are conforming to the requirements in DIN 8078 Section 3.5 related to shock resistance test (under 0ºC ).Its vulnerability to shocks increases under temperatures below the freezing point.In general ,this situation applies to all types of Polipropilen pipes.Against shocks, throwing out the pipes or pipe couplings from vehicles or similar practices should be avoided.

Quality and reliability: pipes and fittings have TSE quality certificates from the Turkish Institute of Standarts.TS 9937 Polipropilen pipes- General purpose quality specifications; TS 10595 Polipropilenden pipes- dimensions; TS 11451 Polipropilenden pipes-Quality specifications for hot water and floor heating systems; and TS 11755 Polipropilen pipe coupling pieces.SPK pipes and fittings are produced in our country under Turkish-German cooperation.Any failures arising out of material defects will be redressed by the mnufacturer company.